Beim Videoschauen kann es vorkommen, dass der Ton zwar weiterläuft, aber alles andere hängt (Maus, Tastatur usw.) es hilft nur der Ausschaltknopf am PC.
Was für Qualität hat den Manjaro derzeit?
Anbei eine Ausgabe von Inxi:
Code: Alles auswählen
[charly@charly-zotac-linux ~]$ inxi --admin --verbosity=7 --filter --width
System:
Kernel: 6.3.0-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/vmlinuz-6.3-x86_64
root=UUID=9ebd82bf-5521-4446-9871-9a82f864923c rw quiet apparmor=1
security=apparmor udev.log_priority=3 usbcore.autosuspend=-1
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: ZOTAC product: ZBOX-ECM73070C/53060C v: XX
serial: <superuser required>
Mobo: ZOTAC model: ZBOX-ECM73070C/53060C v: XX serial: <superuser required>
UEFI: American Megatrends v: 5.17 date: 10/28/2021
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Device PID:408a
serial: <filter> charge: 50% (should be ignored) rechargeable: yes
status: not charging
Memory:
System RAM: available: 31.22 GiB used: 4.02 GiB (12.9%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i5-10400 bits: 64 type: MT MCP arch: Comet Lake
gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
model-id: 0xA5 (165) stepping: 3 microcode: 0xF4
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 2375 high: 2900 min/max: 800/4300 scaling:
driver: intel_pstate governor: powersave cores: 1: 800 2: 2900 3: 2900 4: 800
5: 2900 6: 2900 7: 2900 8: 2900 9: 2900 10: 2900 11: 2900 12: 800
bogomips: 69629
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs
ibrs_enhanced ida intel_pt invpcid invpcid_single lahf_lm lm mca mce
md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe
pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand
rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2
ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer
vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology
xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: Enhanced IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional,
RSB filling, PBRSB-eIBRS: SW sequence
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CometLake-S GT2 [UHD Graphics 630] vendor: ZOTAC driver: i915
v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports:
active: none empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0
chip-ID: 8086:9bc8 class-ID: 0300
Device-2: NVIDIA GA106 [GeForce RTX 3060] vendor: ZOTAC driver: nvidia
v: 530.41.03 alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-05) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 1 speed: 2.5 GT/s
lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 01:00.0
chip-ID: 10de:2503 class-ID: 0300
Display: x11 server: X.Org v: 21.1.8 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting,nvidia alternate: fbdev,nouveau,nv,vesa dri: iris
gpu: i915,nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26")
s-diag: 583mm (22.95")
Monitor-1: DP-0 res: 1920x1080 hz: 60 dpi: 82
size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 530.41.03 renderer: NVIDIA GeForce RTX
3060/PCIe/SSE2 direct-render: Yes
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: ZOTAC driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
chip-ID: 8086:06c8 class-ID: 0403
Device-2: NVIDIA GA106 High Definition Audio vendor: ZOTAC
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 01:00.1 chip-ID: 10de:228e
class-ID: 0403
API: ALSA v: k6.3.0-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: PipeWire v: 0.3.70 status: active with: 1: pipewire-pulse
status: active 2: pipewire-media-session status: active 3: pipewire-alsa
type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli
Network:
Device-1: Realtek Killer E3000 2.5GbE driver: r8169 v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 port: 4000 bus-ID: 03:00.0 chip-ID: 10ec:3000
class-ID: 0200
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000
bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp4s0 state: down mac: <filter>
Device-3: Intel Wi-Fi 6 AX200 vendor: Rivet Networks Killerâ„¢
driver: iwlwifi v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0
chip-ID: 8086:2723 class-ID: 0280
IF: wlp5s0 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-5:5 chip-ID: 8087:0029
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 3.64 TiB used: 1.59 TiB (43.6%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 3B4QFXO7 temp: 40.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: SDSSDH3 2T00
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 40RL scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: SanDisk model: Extreme 55AE
size: 931.48 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 3.2 spd: 10 Gb/s lanes: 1 mode: 3.2 gen-2x1 tech: N/A serial: <filter>
fw-rev: 3001 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 109.89 GiB size: 107.6 GiB (97.92%) used: 40.81 GiB (37.9%)
fs: ext4 dev: /dev/nvme0n1p6 maj-min: 259:6 label: N/A
uuid: 9ebd82bf-5521-4446-9871-9a82f864923c
ID-2: /boot raw-size: 1000 MiB size: 965.9 MiB (96.59%)
used: 142.5 MiB (14.8%) fs: ext4 dev: /dev/nvme0n1p5 maj-min: 259:5
label: N/A uuid: f8c0fdd0-c305-4e01-a5f2-186925d0008a
ID-3: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
used: 32.8 MiB (34.2%) fs: vfat dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
uuid: C8B9-632B
ID-4: /home raw-size: 420.69 GiB size: 413.02 GiB (98.18%)
used: 248.18 GiB (60.1%) fs: ext4 dev: /dev/nvme0n1p7 maj-min: 259:7
label: N/A uuid: 50cc5874-3e7b-4de0-81ea-c0801d117aea
ID-5: /home/<filter>/SSD raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 1.31 TiB (71.8%) fs: ntfs dev: /dev/sda1 maj-min: 8:1 label: Laufwerk
uuid: 4A2235C42235B633
ID-6: /run/media/charly/QNAP01 raw-size: N/A size: 16 MiB
used: 0 KiB (0.0%) fs: nfs4 remote: 192.168.1.17:/
ID-7: /run/media/charly/QNAP01/Multimedia raw-size: N/A size: 35.64 TiB
used: 28.2 TiB (79.1%) fs: nfs4 remote: 192.168.1.17:/Multimedia
ID-8: /run/media/charly/QNAP01/TR-004 raw-size: N/A size: 16.37 TiB
used: 13.67 TiB (83.5%) fs: nfs4 remote: 192.168.1.17:/TR-004
ID-9: /run/media/charly/QNAP01/charly raw-size: N/A size: 35.64 TiB
used: 28.2 TiB (79.1%) fs: nfs4 remote: 192.168.1.17:/charly
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 389.8 GiB fs: ntfs label: N/A
uuid: F0CABF53CABF1536
ID-3: /dev/nvme0n1p4 maj-min: 259:4 size: 721 MiB fs: ntfs label: N/A
uuid: 081677F71677E3DA
ID-4: /dev/sdb1 maj-min: 8:17 size: 931.48 GiB fs: ext4 label: Timeshift
uuid: b6b1f8d2-9e05-4411-8986-032cf0ad8150
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2109:2811
class-ID: 0900
Hub-3: 1-1.4:4 info: VIA Labs Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 2109:2811
class-ID: 0900
Hub-4: 1-4:3 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 1-4.3:6 info: American Power Conversion Uninterruptible Supply
type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 2mA chip-ID: 051d:0002
class-ID: 0300 serial: <filter>
Hub-5: 1-4.4:8 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 1-5:5 info: Intel AX200 Bluetooth type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 8087:0029 class-ID: e001
Device-2: 1-9:7 info: Realtek 3-in-1 (SD/SDHC/SDXC) Card Reader
type: mass storage driver: ums-realtek interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 0bda:0153 class-ID: 0806 serial: <filter>
Device-3: 1-11:9 info: Logitech Unifying Receiver type: keyboard,mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
chip-ID: 046d:c52b class-ID: 0300
Hub-6: 2-0:1 info: super-speed hub ports: 8 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-7: 2-2:2 info: VIA Labs Hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 2109:8110
class-ID: 0900
Hub-8: 2-2.4:4 info: VIA Labs Hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 2109:8110
class-ID: 0900
Device-1: 2-4:3 info: SanDisk Extreme 55AE type: mass storage driver: uas
interfaces: 1 rev: 3.2 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1
power: 896mA chip-ID: 0781:55ae class-ID: 0806 serial: <filter>
Sensors:
System Temperatures: cpu: 32.0 C pch: 54.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 341 Uptime: 5m wakeups: 2 Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
pkgs: 1868 libs: 424 tools: pamac,yay pm: flatpak pkgs: 0 Shell: Bash
v: 5.1.16 running-in: xfce4-terminal inxi: 3.3.27
[charly@charly-zotac-linux ~]$
Wie könnte ich dem Fehler auf den Grund gehen?
Danke schon mal.
Liebe Grüße Charly.
Edit: Ich hatte vor einiger Zeit mal eine externe SSD hinten am USB angeschlossen (für Timeshift Backup). Habe die mal entfernt.
Vielleicht war es das ja schon.
